
Learning how to answer graph questions in science starts with knowing what the graph can tell you. A streamflow graph can show when a river carried more water per second and how quickly that number changed. It cannot, by itself, tell you why the flow changed. On a test, a strong answer makes that distinction clear: it uses readings from the graph to support a claim and brings in other evidence when the question asks for a cause.
A graph of streamflow over time at a particular location is a type of hydrograph. Here, streamflow means discharge: the volume of water passing a cross section of the channel per unit time. The U.S. Geological Survey guide to streamflow measurement explains what discharge represents and how it is measured.
The practice graph below uses invented data. The horizontal axis shows hours after the start of the record, not hours after rain began. The vertical axis shows discharge in cubic meters per second (m3/s). Each dot marks one reading. The dots are not connected, so the graph does not show what happened between readings.
Discharge (m³/s)
30 | ●
25 |
20 | ●
15 | ●
10 | ● ●
5 |
0 +-------------------------
0 2 4 6 8
Time since start (h)
Read a point by keeping its two coordinates together. The dot above 4 on the horizontal axis lines up with 30 on the vertical axis. Write “At hour 4, discharge was 30 m3/s,” not “At 4, the water was 30.” The first version tells the reader when the reading was taken, what quantity was measured, and what units apply. A discharge of 30 m3/s is a rate of flow, not a total volume of 30 m3 and not a water depth.
Suppose the prompt says, “Describe how discharge changed over the period shown.” A useful answer is: “Discharge rose from 10 m3/s at hour 0 to a recorded maximum of 30 m3/s at hour 4, then fell to 10 m3/s by hour 8.” The verbs rose and fell describe the trend. The values and times show where it came from. The word recorded makes clear that 30 m3/s is the highest plotted reading, not necessarily the highest flow the stream reached between readings.
If the prompt instead says, “Support the claim that discharge declined faster from hour 4 to hour 6 than from hour 6 to hour 8,” use the readings that let you compare those intervals directly. In the first two hours, discharge fell from 30 to 15 m3/s, a drop of 15 m3/s. In the next two hours, it fell from 15 to 10 m3/s, a drop of 5 m3/s. Both intervals lasted two hours, so the larger drop means a faster average decline in the first interval. That last sentence connects the evidence to the claim.
If the intervals were different lengths, comparing the drops alone would not be enough. Divide each change in discharge by its elapsed time before comparing. For the first interval here, the average decline was 7.5 m3/s per hour. That is a change in discharge per hour, not discharge itself. For more practice tracking what happens to units when you divide, see our guide to dimensional analysis in earth science.
“Discharge increased from hour 0 to hour 4” is a description. “Rainfall produced runoff that reached the stream and raised its discharge” is a proposed explanation. The second sentence adds both a cause and a mechanism: rain fell on land, and some of that water reached the channel as runoff. That mechanism is plausible, but the practice graph has no rainfall measurements. Calling the rise a response to rain would treat a possibility as an observation.
If asked to suggest a cause, you could write: “Rainfall in the area draining to the stream could have increased discharge by generating runoff. I would check whether rain fell in that area before the rise.” Rainfall records showing rain before the rise would support that explanation. Timing alone would not rule out other causes, such as an upstream reservoir release. If the problem gives you both rain records and release records, use them to decide which explanation the evidence better supports.
Avoid using the claim as its own explanation. “The river’s discharge rose because more water flowed past the gauge each second” just restates what higher discharge means. An explanation identifies a process that could account for the increase. A description does not need that extra step. If the prompt only asks what changed, adding a guess about rain makes the answer less precise, not more complete.
Use the same graph for the prompts below. Write your answers before reading the sample responses. Underline the times and values you used, then check that each one helps answer the question.
When working on IESC training and practice problems, try reading your answer without looking back at the graph. If “it went up, then down” could describe almost any graph, revise it to name the quantity and give the readings that show the change. If you wrote “because,” check whether the prompt supplies evidence for what comes after it.
Should I give an exact value if a point falls between tick marks?
If you have to estimate from the scale, use “about” or “approximately” and include the unit. Do not report more digits than the graph lets you read reliably.
Is the steepest part of a graph the same as the peak?
No. The steepest part shows where discharge changes fastest, while the peak is where discharge is highest.
Can I say a storm caused the streamflow rise?
Only make that claim if the evidence supports it. A streamflow graph alone shows the rise, so describe a storm as a possible cause unless you have other evidence.
About the International Earth Science Competition: an online earth science competition for high school students from around the world. Qualification Round 2027: submissions are open until Sunday, 24 January 2027. How the rounds work